Changing HP Storage 3PAR IP address

First, after connecting to 3par via SSH connection, we change the IP and Gateway using the setnet commands. Finally, we use the Finish command and the process is completed.

NOTE: Before using these commands, check whether you have access to your new IP and Gateway address. If you cannot reach it, you cannot connect again as your access will be cut off.

ssh [email protected]
shownet
setnet startaddr 192.168.1.123 172.30.2.123 255.255.255.0 (old_IP new_IP new_Subnet)
setnet startgateway 212.64.214..1
setnetcleargateway
setnet finish -f
shownet

You can click for our Türkiye location VDS packages.